jeepfan.com 2018 JL Rubicon | Jeepfan.com

Wrangler JL Door Entry Guards Install

jeepfan.com staff — Wed, 08 Dec 2021 23:05:00 +0000

The JL has a thicker section of body in the door opening than any Jeep Wrangler or CJ prior to this model. This section is especially vulnerable to paint damage and such so covering it up seems like a no-brainer. There’s a few options available and we chose the Quadratec ones due to the wider …

The post Wrangler JL Door Entry Guards Install appeared first on Jeepfan.com.

Mopar JL Wrangler Tailgate Table

jeepfan.com staff — Thu, 11 Mar 2021 15:25:33 +0000

This simple addition to your JL comes in handy in so many ways whether it’s holding your lunch, gear or tools. The Mopar JL Tailgate Table installs in about 30 minutes and neatly folds away when not in use. Luckily the Jeep engineers thought ahead and equipped the JL tailgate with threaded holes just waiting …

The post Mopar JL Wrangler Tailgate Table appeared first on Jeepfan.com.

Firestik CB Antenna Installation

jeepfan.com staff — Sun, 07 Feb 2021 15:00:47 +0000

We’ve installed a President Bill CB into the 2018 JL and to go with it we are now installing a 4′ Firestik antenna with a Firewire cable. The long 4 door JL can still use an 18′ cable to get from the dash area to the tailgate. Mounting The Mopar tailgate reinforcement bracket includes a …

The post Firestik CB Antenna Installation appeared first on Jeepfan.com.

President Bill CB Radio Installation

jeepfan.com — Sat, 26 Dec 2020 15:16:45 +0000

In this two part article we install the CB first then the antenna, both we got from Right Channel Radios. Finding a suitable location in a JL Wrangler isn’t particularly easy. Just like the TJ and JK before spare space is increasingly limited. Luckily a small CB like the Bill exists with its approximate 4″x4″x1″ …

The post President Bill CB Radio Installation appeared first on Jeepfan.com.

President Bill CB with Firestik Antenna Installation

jeepfan.com staff — Sat, 26 Dec 2020 15:15:57 +0000

We needed a new CB for the jeepfan.com 2018 Wrangler Unlimited JL and due to such limited space we were looking for a compact CB that has the essential features. In addition to the CB we chose a Firestik 4′ Antenna and Firering cable. CB Radio After checking out some CB options from Right Channel …

The post President Bill CB with Firestik Antenna Installation appeared first on Jeepfan.com.

Dirtydog Sun Shade for Wrangler JL

jeepfan.com — Mon, 07 Sep 2020 14:09:47 +0000

Anyone who actually puts their top down in their Jeep knows that in the heat of the summer the sun just bakes you in your Jeep. In addition to the heat and the sun on us the seats, especially leather ones just become almost too hot to sit on. Sun shades are a great solution …

The post Dirtydog Sun Shade for Wrangler JL appeared first on Jeepfan.com.

Wrangler JL Rear Track Bar Bracket Install

jeepfan.com — Sun, 03 Nov 2019 20:57:24 +0000

The coil spring equipped Wranglers all utilized a track bar on the front and rear axle to keep the axle located in relation to side to side. It’s simple really, one side of the bar is attached to the frame, the other side to the axle. The bar is connected at opposite sides. Since the …

The post Wrangler JL Rear Track Bar Bracket Install appeared first on Jeepfan.com.

Teraflex JL Wrangler Steering Stabilizer Install

jeepfan.com — Sun, 29 Sep 2019 13:31:47 +0000

When adding larger tires to your JL Wrangler you can often experience death wobble at certain speeds. Unfortunately the Jeep didn’t seem to solve the death wobbly with the JL. Interestingly it seems to happen to some and not others. A small 2″ lifted JL Sport or Sahara can easily run 35’s and a Rubicon …

The post Teraflex JL Wrangler Steering Stabilizer Install appeared first on Jeepfan.com.

Warn VR10-S Winch JL Wrangler Install Page 3

jeepfan.com — Sat, 27 Apr 2019 15:06:12 +0000

We are getting somewhere. The final steps are wiring up the winch and installing the bumper skid plate. Wiring the winch can be a bit of a challenge since there is little room. We found removing the air box made accessing a nice path for the wires easier. The winch should be wired direct to …

The post Warn VR10-S Winch JL Wrangler Install Page 3 appeared first on Jeepfan.com.

Warn VR10-S Winch JL Wrangler Install Page 2

jeepfan.com — Sat, 27 Apr 2019 14:40:06 +0000

With the bumper removed some modifications need to be made to the bumper to allow the winch to pass through the front. Remove the torx bolts to remove the top plate in the bumper. Once the bolts are removed use the supplied nuts to replace the bolts. At this point these bolts are for appearance …

The post Warn VR10-S Winch JL Wrangler Install Page 2 appeared first on Jeepfan.com.